CNC Broach Tool LLC

We offer off-the-shelf CNC broaching tools for internal keyways and splines. Blind hole broaching with our keyway cutter is also possible. CNC Broach Tool's keyway cutters we have clients broaching continuously in Titanium, 4140 , stainless ect CNC mill broaching and CNC Lathe broaching allows yet another operation to be completed on your machining center rather than moving parts to a separate key-seater or broaching machine, vending out the operation to an expensive specialty broaching house, spending valuable shop time making your own tools or die-sinking your blind keyways. Mike at Derby Machine in Kansas wrote this letter about his experience with CNC Broach Tools: We had a blind hole to id broach in 304 stainless and found it difficult to find a vendor who could broach our part to print. We were forced to ship our parts from Kansas to Chicago to get them broached. It cost us $15 per part plus shipping to and from Chicago. While searching the internet we found a broaching tool at cncbroachtools.com. We were very skeptical but had nothing to lose and decided to give them a shot. When we received the tool and started setting up the machine John was very helpful in instructing us on how to install the tool correctly and worked with us to get our program, feeds, and speeds correct. This tool paid for itself several times over on the first run alone. We get well over 100 parts on a single insert point with a cycle time increase of only 2 minutes 14 seconds. We have ran over a thousand parts using very few inserts and never lost the tool itself. We have never scrapped any parts because of the broach. It holds the broach depth and width thru the whole run. I am extremely happy with the results and cost saving of this tool and would recommend it to anyone who has an id broach issue or would like to machine their part complete. Sincerely, Mike Turner Operations Mgr. Derby Machine